Enter MERRY25 at checkout and you’ll see $25 OFF appear on your total right away.
Stars & Stripes Address Pillar — Solar House Number Light
If your house number disappears after dark, delivery drivers and guests will miss your home long before they ever see your porch light. This 28" solar pillar puts a warm, even glow on your numbers every night — with flag panels that look like real decor, not a gadget.
- $25 OFF all December with code MERRY25 at checkout.
- Large white numbers on deep navy, printed on the front and back panels so they’re easy to read from the street.
- All four sides finished: your numbers on the front and back panels, and American flag artwork on both side panels — looks complete from every angle by your steps or driveway.
- Warm, even dusk-to-dawn glow from an internal diffuser — no harsh “blue dot” solar look.
- Built one at a time in our Tennessee workshop from steel and cut acrylic, not thin plastic from a warehouse shelf.
Why homeowners grab this while the December offer is live
Most addresses are technically there — but hard to see, especially after dark. This fixes that without looking like a gadget.
What usually happens:
- Stick-on numbers fade, peel, or fall off after a year in the weather.
- Cheap plastic solar stakes glow weakly for one season, then die and end up in the garage tote.
- Guests, deliveries, and drivers slow down, squint, and still miss your house at night.
What this pillar does instead:
- 28" tall steel pillar that puts your numbers where drivers actually look — at the start of your walk or drive.
- Large white digits on deep navy, sized to be read from the street after dark.
- Full American flag panels on both sides so it reads as real decor by day and a warm, glowing flag by night.
- Internal diffuser that turns the light into a soft, even glow instead of harsh LED pinpoints.
- If you’ve got a bin in the garage full of dead solar stakes, this is the “buy once” piece that replaces them for good.
Where it lives at your place
You’re not buying decor for a random corner — you’re solving “can people find our house at night?”
Most people set the pillar:
- At the start of the walkway to the front door.
- Beside the driveway where guests and delivery drivers slow down.
- Near a porch column so it feels built-in with the rest of the house.
Wherever it lands, the job is the same: your house stops being the one people drive past and becomes the one they can actually find — and remember — after dark.
Tell us your address once. We’ll build the pillar around it.
Each Stars & Stripes Address Pillar is made to order with your house number printed on the front and back panels.
Most addresses use 3–5 digits. If yours is longer or includes letters, we’ll lay it out so it stays clean and readable.
Use the address box near the top of the page (above this description) to enter your house number exactly as you want it printed.
We’ll print your numbers on the front and back panels, double-check alignment, and build your pillar to match the current run.
Size you can picture without guessing
28" is tall enough to be seen from the street, but not so tall it looks out of place next to your steps or railing.
Made here, built like our premium solar towers
Same steel, same diffuser system — just sized and laid out for your address.
- Steel frame: laser-cut, welded, and powder-coated in matte black for outdoor use.
- UV-printed panels: your numbers and the flag artwork are printed directly onto acrylic — no stickers or vinyl to curl.
- Internal diffuser: a dedicated layer inside the pillar that smooths the light so the numbers and flag glow evenly.
- Solar unit: integrated into the top cap with dusk-to-dawn operation — no wiring or timers to fuss with.
This is a pillar that’s finished on all four sides: numbers on the front and back, flags on both sides — so it looks right from every direction as you walk around it.
We build this pillar in runs — cutting, printing, and assembling each batch together so the finish and glow stay consistent. When a run fills, we pause new orders to catch up before opening the next batch.
Why most customers order now (even with a 6–8 week lead time)
You’re not buying a last-minute holiday item — you’re upgrading how your home looks and how easy it is to find at night.
We build in small batches. Ordering now locks in your place in the next run — waiting means your spot moves farther out.
Winter is when people finally fix “no one can see our house number.” Most customers order now so they’re not still on the waitlist when spring hits.
Steel, cut acrylic, and a real diffuser system take more time than plastic imports. This is the kind of quality you wait for once, then enjoy for years.
“We had to wait a bit for the build, but when it showed up it was obvious why. It feels like something that belongs with the house, not a temporary yard gadget.”
December-only savings: how MERRY25 works
This is the one month we’re offering a straight $25 discount on the Stars & Stripes Address Pillar.
Add the Stars & Stripes Address Pillar to your cart and place your order anytime in December while this offer is live.
In the discount box, type MERRY25. You’ll see $25 OFF applied to your total immediately.
Your order goes into the next available run with an estimated 6–8 week lead time. When your pillar is finished and boxed, we send a shipping confirmation with tracking.
Fine print: Offer valid only on Stars & Stripes Address Pillar orders placed during December. One discount per pillar. Not valid on past orders or combined with other promotions.
Shipping, warranty & support
Each pillar is built after you order so your numbers, flag, and finish all match the current run. Typical lead time is 6–8 weeks from order to ship, depending on where your order lands in the queue.
If anything arrives damaged or isn’t working right out of the box, we make it right. Contact us with your order info and photos and we’ll repair or replace as needed.
Questions before or after you order? You can reach our small team directly by phone or email — the same people who build the lights answer the questions.
Questions people usually ask
How many digits can I put on the front?
Most addresses use 3–5 numbers, which fill the panel nicely. If yours is longer or includes letters, contact us before ordering and we’ll confirm a layout that stays clean and readable.
Is the design only on two sides?
No. All four sides are finished. Two panels carry your address numbers (front and back), and the other two panels carry the American flag artwork, so it looks complete as you walk all the way around it.
Does it need wiring or batteries?
No wiring and no batteries to swap. The solar unit charges during the day and turns on automatically at dusk.
How long does it stay lit?
On a good charge it typically runs from dusk into the early morning hours. Like any solar light, run time depends on how much direct sun it gets during the day.
Will it handle rain, snow, and winter?
Yes. The frame is steel with a durable outdoor powder coat, and the panels are acrylic. It’s built for typical year-round weather. In extreme ice or storms, treat it like other decor and move it to a sheltered spot if needed.
How do I mount it?
The base plate can be anchored to a concrete pad, paver, or deck using outdoor-rated hardware, or set on a flat stone where it isn’t likely to be bumped. Many customers place it at the start of a path or driveway.
What happens if the panel or solar unit is ever damaged?
Because we print the panels and assemble the light in-house, we can make replacement panels or swap the solar unit if something happens down the road. Just reach out with your order information.
Ready to fix “can they find our house?” and reserve your spot in the next run?
Enter your address once, apply MERRY25 at checkout, and we’ll build a steel pillar around your numbers — with a flag panel that looks right by your steps or driveway and a warm glow that shows up every night for years.