Porch Sip
Porch Sip puts a cold drink beside your wooden rocker.
The padded screw clamp fits a flat wooden arm 0.75 to 1.5 in thick and at least 2 in wide. Measure the flat contact area and check clearance underneath the arm before ordering.
The cradle measures 6 x 7 x 6 in. Its basket is 3.5 in across inside and 3.5 in deep. Use a straight cup no more than 3.25 in across and 4.5 in tall.
Two side pivots let the basket swing up to 25 degrees forward or back. Set it to swing along the chair runners. This is one pivot axis. It does not level a cup sideways.
Use a cup without a handle. Leave room below the rim of your drink. The holder is not spill-proof. Keep fingers clear of the pivots while the chair moves.
Matte navy powder-coated steel with our UV-printed dogwood and stripe design. Built and printed in our Tennessee shop.
Steel gauge and stock thickness are not recorded in the current shop specification. Ask us to confirm thickness before ordering.
Fit the pads on sound flat wood. Padding does not establish that a finish will resist clamp marks. This clamp is not specified for round or sharply curved arms.
Includes the clamp and cup cradle. Chair and glass are separate. Use cold drinks on a covered porch. Remove the holder before moving or folding the chair.
