Liberty Solar Address Pillar – Finally Seen at Night

$199.95
Made Here, Built Right • Nashville, TN
Finally See Your Address at Night

A steel solar pillar built with your numbers and a warm, even glow — so drivers and guests can actually find the house after dark.

Buying more than one?

Add 2 pillars to your cart and save $100 automatically at checkout.

Mix & match any two designs (choose your flag style/variant) — discount still applies automatically when 2 are in the cart.

Common for long driveways, shared entries, or front + back visibility.

At a glance:
  • Not plastic — real steel frame with cut acrylic panels.
  • 360° design: two sides show your chosen flag panels, and the other two sides show your house number.
  • Warm dusk-to-dawn glow so your numbers show up every night.
  • Available in 28" or 48" (select your size above).
  • Built one at a time in our Tennessee workshop around your house numbers.
Who this is for

This is for homeowners who want their address to be clearly visible at night and are done replacing cheap plastic numbers or solar stakes every year.

Who it’s not for

If you’re looking for the cheapest way to mark your house or something temporary you’ll swap out next season, this probably isn’t the right fit.

Built to order: each pillar is made after you enter your numbers, then assembled and finished in our Tennessee workshop. For current lead time, see the shipping/lead-time note in our site footer.

Why homeowners want this instead of plastic numbers

Most addresses are technically there — but hard to see, especially after dark.

What usually happens:

  • Stick-on numbers look fine for a year, then fade, peel, or fall off.
  • Little plastic solar signs glow for one season, then sit dead at the end of your drive.
  • Guests, deliveries, and drivers slow down, squint, and still miss your house at night.

What this pillar does instead:

  • Choose 28" or 48" depending on how far you need it seen (select size above).
  • Large white digits on deep navy, designed to be read from the road after dark.
  • Internal diffuser that throws a soft, even glow instead of harsh LED pinpoints.
Liberty Address Pillar beside front steps in daylight
Daytime beside the steps — reads as clean black steel with bold numbers.
Liberty Address Pillar glowing at dusk
At dusk the diffuser takes over — warm, even glow without the “cheap solar” look.

360° design: looks right from every approach

This pillar is built to be seen from multiple directions — driveway, sidewalk, and both lanes.

  • Two sides: your chosen flag panels (the style you select above).
  • Two sides: your house number panels for visibility from both directions.
  • Same diffuser system inside, so all four sides glow clean and even at night.

Translation: no “wrong side” when you place it near the drive — the numbers show either way.

Where it lives at your place

You’re not buying decor for a random corner — you’re solving “can they find our house?”

Liberty Address Pillar at the edge of a driveway at night
Placed where drivers naturally look — at the start of the drive or walkway.

Most people set the pillar:

  • At the start of the walkway leading to the front door.
  • Beside the driveway where guests and delivery drivers slow down.
  • Near a porch column so it reads like part of the architecture.

Wherever it lands, the job is the same: your house stops being the one people drive past and becomes the one they can actually find — at night.

Choose your address numbers

Each pillar is made to order with your house number printed on the number panels.

Short or long — we format your address to stay clean and readable.

If anything looks off with spacing, we’ll send a quick proof before building.

Use the tool above or beside this description to enter your house numbers. We’ll print them exactly as you type them, double-check alignment, and send a proof if anything looks off.
Ordering more than one pillar?

Enter each address separated by a comma.

Example: 5321, 8313

We’ll build one pillar for each number exactly as entered.

Size you can picture without guessing

Available in 28" or 48". Choose the size above based on how far from the road you need it seen.

Liberty Address Pillar next to railing for scale
Shown next to a standard porch railing so you can feel the scale.
Overall height
28" or 48" (select your size above)
Footprint
Approx. 6.5" × 6.5" base plate
Front panel area
Large vertical number panel for road visibility
What it replaces
Faded stick-on numbers, tiny plaques, and flimsy plastic solar stakes.

Made here, built like our premium solar towers

Same steel, same diffuser system — just sized and laid out for your address.

Close-up of numbers and diffuser
Crisp UV-printed graphics with a diffuser layer inside for a smooth glow.
  • Steel frame: laser-cut, welded, and powder-coated in matte black for outdoor use.
  • UV-printed panels: printed directly onto acrylic — no stickers or vinyl to curl.
  • Internal diffuser: smooths the light so the glow is even (no harsh hotspots).
  • Solar unit: integrated into the top cap with dusk-to-dawn operation — no wiring.

Two sides display your house number, so it reads correctly from either direction.

Liberty Address Pillar on the workshop table
Built one at a time in our Tennessee workshop, not pulled from a warehouse shelf.

We cut, print, and assemble in small batches so the finish and glow stay consistent.

Small-batch production

We build in limited runs so finish and glow stay consistent.

Real workshop, not a logo

The same crew that builds the product answers questions — phone or email.

Replacement ready

We can make matching replacement panels or swap the solar unit if something happens later.

How ordering and setup works

  1. Tell us your house number. Use the tool above to enter the exact digits you want printed.
  2. Select your size. Choose 28" or 48" above.
  3. We build your pillar in Tennessee. Print panels, assemble diffuser + solar unit, test the light.
  4. We pack it like it matters. Ships in protective foam so it arrives ready to set in place.
  5. Set it where you want it. Anchor base to concrete/pavers/deck using outdoor hardware, or place on a flat stone where it won’t be bumped.
  6. Let the sun take over. It charges by day and turns on automatically at dusk.

Shipping, warranty & support

Made to order

Each pillar is built after you order. For current lead time, see the shipping/lead-time note in our site footer.

Out-of-the-box guarantee

If anything arrives damaged or isn’t working right out of the box, we make it right.

Real people to talk to

Questions before or after you order? Reach our small team by phone or email.

Questions people usually ask

Does this replace my current house numbers?

Yes. Many customers remove old stick-on numbers once the pillar is installed.

How many digits can I put on the number panels?

As many as you need. We format your address to stay clean and readable, and if anything looks off we’ll send a quick proof before building.

Do I need wiring or batteries?

No wiring and no batteries to swap. It charges during the day and turns on automatically at dusk.

How do I mount it?

The base plate can be anchored to concrete/pavers/deck with outdoor hardware, or placed on a flat stone where it won’t be bumped.

What’s on each side?

It’s a 4-sided (360°) design: two sides show your chosen flag panels, and the other two sides show your house number for visibility from either direction.

Ready to make your address easy to find every night?

Tell us your house number once. We’ll build a steel pillar around it and ship a piece that looks like it belongs next to your walk or driveway — so your home is the one people can spot after dark.

Built in small batches. We don’t rush production — we build it right.

Want two?

Add 2 pillars to your cart and save $100 automatically at checkout.

Mix & match any two designs (choose your flag style/variant) — discount still applies automatically when 2 are in the cart.

If ordering two different addresses, enter them separated by a comma (example: 5321, 8313).

Made in the USA