28" patriotic solar address pillar with your house numbers on the front and back, and full American flag panels on both sides — built like real outdoor decor, not a plastic gadget.
- Easy-to-read white numbers on deep navy, sized for the street side of your home.
- 360° layout — your numbers repeat on the front and back, with matching flag panels on both sides, so it looks right from every angle.
- Warm, even solar glow every night — no wiring, no switches, no harsh LED hotspots.
- Handcrafted steel frame and UV-printed acrylic panels, made in small batches in Tennessee.
Why homeowners want this instead of plastic numbers
Most addresses are technically there — but hard to see, especially after dark.
What usually happens:
- Stick-on numbers look fine for a year, then fade, peel, or fall off.
- Little plastic solar signs glow for one season, then sit dead at the end of your drive.
- Guests, deliveries, and drivers slow down, squint, and still miss your house at night.
What this pillar does instead:
- 28" tall steel pillar that stands where your address actually needs to be seen.
- Large white digits on deep navy, designed to be read from the road after dark.
- Full American flag side panel so it feels like real outdoor decor, not a yard gadget.
- Internal diffuser that throws a soft, even glow instead of harsh LED pinpoints.
Where it lives at your place
You’re not buying decor for a random corner — you’re solving “can they find our house?”
Most people set the pillar:
- At the start of the walkway leading to the front door.
- Beside the driveway where guests and delivery drivers slow down.
- Near a porch column so it reads like part of the architecture.
Wherever it lands, the job is the same: your house stops being the one people drive past and becomes the one they can actually find — and remember — at night.
Choose your address numbers
Each pillar is made to order with your house number printed on the front panel.
Most addresses use 3–5 digits. If yours is longer or includes letters, we’ll lay it out so it stays clean and readable.
Size you can picture without guessing
28" is tall enough to be seen from the street, but not so tall it looks out of place next to your steps or railing.
Made here, built like our premium solar towers
Same steel, same diffuser system — just sized and laid out for your address.
- Steel frame: laser-cut, welded, and powder-coated in matte black for outdoor use.
- UV-printed panels: your numbers and the flag artwork are printed directly onto acrylic — no stickers or vinyl to curl.
- Internal diffuser: a dedicated layer inside the pillar that smooths the light so the numbers and flag glow evenly.
- Solar unit: integrated into the top cap with dusk-to-dawn operation — no wiring, no timers to fuss with.
All four acrylic panels are finished — numbers on the front and back, flags on both sides — so it reads correctly from every direction.
We build this pillar the same way we build our patriotic solar towers — cutting, printing, and assembling each one in small batches so the finish and glow stay consistent.
We cut, print, and assemble in limited runs so finish and glow stay consistent. When a run fills, we focus on building and shipping those pillars before opening the next one.
The same crew that makes our patriotic solar towers builds these address pillars — no generic imports with a sticker slapped on the box.
Because we print the panels and assemble the light in-house, we can make matching replacement panels or swap the solar unit if something happens down the road.
How ordering and setup works
- Tell us your house number. Use the tool above to enter the exact digits you want printed on the front panel.
- We build your pillar in Tennessee. We UV-print your panels, weld and coat the frame, install the diffuser and solar unit, and test the light.
- We pack it like it matters. The pillar ships in protective foam and carton so it arrives ready to set in place.
- Set it where you want it. Anchor the base to concrete, pavers, or a deck using outdoor hardware, or place it on a flat stone where it won’t be bumped.
- Let the sun take over. Give it a full day of sun, then watch it turn on automatically at dusk — every night.
Shipping, warranty & support
Each pillar is built after you order so your numbers, flag, and finish all match the current run. Check the banner at the top of the site for the current lead time from our shop to your door.
If anything arrives damaged or isn’t working right out of the box, we make it right. Contact us with your order info and photos and we’ll repair or replace as needed.
Questions before or after you order? You can reach our small team directly by phone or email — the same people who build the lights answer the questions.
Questions people usually ask
How many digits can I put on the front?
Most addresses use 3–5 numbers, which fill the panel nicely. If yours is longer or includes letters, contact us before ordering and we’ll confirm a layout that stays clean and readable.
Is the design only on two sides?
No. All four sides are finished. Your address numbers are printed on the front and back panels, and the American flag artwork is printed on both side panels, so it looks the same as you walk around it.
Does it need wiring or batteries?
No wiring and no batteries to swap. The solar unit charges during the day and turns on automatically at dusk.
How long does it stay lit?
On a good charge it typically runs from dusk into the early morning hours. Like any solar light, run time depends on how much direct sun it gets during the day.
Will it handle rain, snow, and winter?
Yes. The frame is steel with a durable outdoor powder coat, and the panels are acrylic. It’s built for typical year-round weather. In extreme ice or storms, treat it like other decor and move it to a sheltered spot if needed.
How do I mount it?
The base plate can be anchored to a concrete pad, paver, or deck using outdoor-rated hardware, or set on a flat stone where it isn’t likely to be bumped. Many customers place it at the start of a path or driveway.
What happens if the panel or solar unit is ever damaged?
Because we print the panels and assemble the light in-house, we can make replacement panels or swap the solar unit if something happens down the road. Just reach out with your order information.
What early buyers and testers are saying
Real reviews will appear here as orders ship. Here’s what early testers have said:
- Addresses that drivers and guests can actually see at night.
- A patriotic piece that looks like it belongs with your home, not the bargain bin.
- Relief from wondering, “Can they find our place?” every time someone is on the way.
Ready to make your address easy to find every night?
Tell us your house number once. We’ll build a steel pillar around it, add the flag panel, and ship a piece that looks like it belongs next to your walk or driveway — so your home is the one people can spot and remember after dark.